Dell POWEREDGE M1000E - Manual (Page 1008)

976 Fabric OS Command Reference
53-1001764-02
trackChangesShow
2
trackChangesShow
Displays status of the track-changes feature.
Synopsis trackchangesshow
Description Use this command to display status of the track-changes feature. It shows whether the feature is
enabled or disabled and if SNMP traps are generated.
The output from the track-changes feature is dumped to the error log for the switch. Use the
errDump command or errShow command to view the error log.
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS Commands" and Appendix A, "Command
Availability" for details.
Operands none
Examples To display the status of the track-changes feature:
switch:admin>
trackchangesshow
Track changes status: ON
Track changes generate SNMP-TRAP: YES
See Also trackChangesHelp, trackChangesSet