Sony SLV-750HF - Manual (Page 11)

VCR Setup
1 Set the RF UNIT on the VCR’s rear panel to CH 3 or
CH4.
If you made A/V connections, skip this step.
Set to whichever channel is not used in your area.
If both are used, pick either channel.
Details are on page 55.
2 Set CABLE BOX CONTROL to OFF.
3 Set NORMAL/CATV to CATV.
4 Preprogram the channels into the VCR.
Press MENU. Select TUNER PRESET.
NCNU NCNU
PTlNCft SCT/CHCCK ПМСЯ SCT/CHCCK
$er UF NCNU SCT UP NCNU
TURCft PTUNCN FRCSCT
SCI VCR Flu»« CHANNCIS SCT VCR Flu»« CHANNCIS
CAeiC 90t CONTROl CAOIC eOX CONTROL
CLOCK SCT CLOCK SCT
Select AUTO PRESET,
then press EXECUTE.
TUNCR FRCSCT ■at
nornal / catv
PAUTO FRCSCT
NORN •CATV
NANUAl SCT #A00 CRASC
AfT
MNC TUNING
•ON Off
VCR Plus+ Channel Setup
1 Find the VCR Plus-i- Channel Listing in your program
guide. For details, see page 42.
2 if the channels in the program guide are different
from the channels that you actually use on your
TV, set the channels that are different as follows:
Press MENU. Select TUNER PRESET.
NCNU NCNU
PTINCR SCT/CHCCK TINCR SCT/CHCCK
SCT UF NCNU SCT UF NCNU
TUNCR FNCSCT PTUNCR FRCSCT
SCI VCR Flu»« CHANNCIS SCT VCR Flu»« CHANNCLS
CA6LC OOX CONTROL CAOLC eOX CONTROL
CLOCK SCT CLOCK SCT
Set to CATV.
TUNCR FRCSCT mm
PNORNAl/CATV NORN •CATV
AUTO FRCSCT
NANUAL SCT eADO
CRASC
AFT eoN OFF
riNC TUNING
ueiaiis are on pages ana
Press MENU.
Select SET VCR PIUS+
CHANNELS.
NCNU NCNU
^TINCR SCT/CHCCK TINCR SCT/CHCCK
SCT UF NCNU SCT UF NCNU
TUNCR FRCSCT TUNCR FRCSCT
SCT VCR fiu »4 channels ► SCT VCR Flu»« CHANNCLS
CAOlC eOX CONTROL CAOlC eOX CONTROL
CLOCK set CLOCK SCT
Enter the program guide channel,
then the channel your VCR uses.
Program listing guide channel -
Details are on page 43.
VCR Flu»« CHANNCL LIST
> 6UI0C TV ÜUI0C TV -----
2 • 73 S9 • 47
5 • 4 OG • 90
17 • SS
20 • 9
43 -tlO
Fu»h NCNU U Rult
Your actual cable channel
CD
<6.
Ш
Details are on pages 19 and 20.
To Watch TV
1 Turn your VCR off, or press the VCR’s TV/VTR button
until the VTR indicator in the display window goes off.
2 Select the channel with your cable box (if you have one),
or directly tune with your TV (if you don’t).
To Watch the VCR
la If you didn’t use the A/V input:
• Turn on the cable box.
• Select CH 3 or CH 4 on the cable box (whichever
you set on the back of the VCR).
• Seiect the output channel of the cable box
(usually 2,3 or 4) on your TV.
1b If you made the A/V connections on page 7:
Set your TV to the A/V input.
2 Insert a cassette and press ► PLAY.
Details are on page 28.
To Record A Program
1 Press VCR Plus+ on the Remote Commander.
2 Enter the program’s PlusCode number.
3 Press ONCE, DAILY, or WEEKLY on the Remote
Commander.
4 Insert a blank cassette.
5 Press TIMER REC on the Remote Commander.
Details are on page 44.
Preparation
111