Sony SLV-750HF - Manual (Page 9)

VCR Setup VCR Plus+ Channel Setup
1
Set the RF UNIT on the VCR's rear panel to CH 3 or
CH4.
If you made A/V connections, skip this step.
Set to whichever channel is not used in your area.
If both are used, pick either channel.
Details are on page 55.
2 Switch on your cable box.
3 SetNORMAL/CATVtoCATV.
Press MENU. Select TUNER PRESET.
N(NU HENU
PTIHCRSCT/CHCCK TIHER SET/CHECK
$cr UP игми SET UP MENU
ruNCR PRESeT PTUNER PRESET
SET VCR Plui« CHANNELS SET VCR P1u4« CHANNELS
CARLE MX CONTROL w CAOlE eOX CONTROL
CLOCK SET CLOCK SET
Set to CATV. i
TUNER PRESET ШШ
PNORNAL/CATV NORN ФСАТУ
AUTO PRESET
MANUAL SET «АОО ERASE
AFT «ON OFF
FINE TUNING
Details are on pages 19 and 20.
4 Set the CABLE BOX CONTROL to ON.
Press MENU. Select CABLE BOX CONTROL
MENU HENU
PTIMER SET/CHECK TIHER SET/CHECK
SET UP MENU SET UP MENU
TUNER PRESET TUNER PRESET
SET VCR Plus* CHANNELS SET VCR Plus* CHANNELS
carle RO x CONTROL p carle rok control
CLOCK SET CLOCK SET
Enter your Cable Box Code
Number. Ihen press EXECUTE.
Select ON, then press EXECUTE.
Tour CARLE ROX COUR NO. CARLE ROX CONTROL
4»»»/
•ON OFF
A im *
EAtor your carle ROX
Codo No. uSfAR 0*$ ko/S U$0 d p to soioct
Rofor 10 the OPOrntAR Push EXECUTE for first
NOAuo) For the Codo t<«o sotup
Then push EXECUTE Push MENU to ouit
Select your Cable Box Output
Channel and press EXECUTE.
Tour CAIU 60X Output C h
•CH?
CHi
CH4
UNc ume tu i on VCR]
use A V to $«Uct CAOiC
»0« CH. ihea puth CXCCUU
Details are on page 23.
1 Find the VCR Plus+ Channel Listing in your
program guide. For details, see page 42.
2 If the channels in the program guide are different
from the channels that you actually use on your
TV, set the channels that are different as follows:
Press MENU.
Select SET VCR Plus+
CHANNELS.
HENU MENU
PTIMER SET/CHECK TIHER SET/CHECK
SET UP MENU SET UP MENU
TUNER PRESET TUNER PRESET
SET VCR Plus* CHANNELS PSET VCR Plus* CHANNELS
CARLE ROX CONTROL CARLE ROX CONTROL
CLOCK SET CLOCK SET
Enter the program guide
channel, then the channel
your VCR uses.
Program listing guide channel
Details are on page 43.
VCR Plus* CHANHCL LIST
GUIDE TV GUIDE TV
г • n S9 • 47
s • 4 66 • 96
17 • ss
?R • 9
43 •UR
Push HENU to OuU
Your actual cable channel—^
s
•S
ai
3
SL
e>
s
To Watch the TV
1 Turn your VCR off, or press the VCR’s TV/VTR button
until the VTR indicator in the display window goes off.
2 Switch on your cable box.
3 Tune the TV to the cable box output channel
(usually 2,3, or 4).
4 Select the channel that you want to watch with your cable
box.
To Watch the VCR
1 Tune the TV to CH 3 or CH 4, (or to A/V Input if you
•PLAY.
made A/V connections.)
2 Insert a cassette and press I
Details are on page 28.
To Record A Program
1 Switch on the cable box.
2 Press VCR Plus+ on the Remote Commander.
3 Enter the program’s PlusCode number.
4 Press ONCE, DAILY, or WEEKLY on the Remote
Commander.
5 Insert a blank cassette.
6 Press TIMER REC on the Remote Commander.
7 Leave the cable box on.
Details are on page 44.
Preparation