Sony SLV-750HF User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Fine-tuning
Normally, the Auto Fine Tuning (AFT) setting on the menu is
set to “ON,” and the AFT function fine-tunes the picture. If
the picture of a channel is not acceptable, fine-tune it
manually.
1
Display the TUNER PRESET menu referring to
steps 1 to 3 in "Presetting All Receivable Channels
Automatically" (page 19)
Press * or V to move
the cursor to FINE
TUNING.
The fine tuning indicator
is displayed.
TUNER PRESET
Hi
NORMAL/CATVeNORM
CATV
AUTO PRESET
MANUAL SET «ADO
ERASE
AFT «ON
OFF
►FINE TUNING t
É=3
Press e or P to get a
clearer picture.
The AFTON/OFF
automatically switches to
“OFF."
TUNER PRESET
CATV
NORMAL/CATVeNORM
AUTO PRESET
MANUAL SET SAOO ERASE
AFT
ON eOFF
►FINE TUNING »
«
»
Press A to move the
cursor to AFT and
select “ON” if you
cannot get a better
picture. Then, press
EXECUTE.
TUNER PRESET
■■
NORHAL/CATvmORN
CATV
AUTO PRESET
MANUAL SET «ADO
ERASE
►AFT eoN
OFF
FINE TUNING
The RNE TUNING indicator
The FINE TUNING indicator shows the operable fine-tuning
range and stops at the optimal point of reception. When a
broadcast is received in an optimal condition, the indicator
may not be at the center position.
Cable TV Channel Assignment
Cable TV systems use letters or numerals to designate the
channels. To tune-in a CATV channel, refer to the chart
below which shows the CATV channel, numbers on this VCR
and the corresponding CATV channel. Note that the channel
number assignment shown in the chart may not correspond
to the channel number used by your local cable company.
Check with your local cable TV company for more
information on the available channels.
Number on this VCR
1
2
...
13
14
15
16
17
18
Corresponding
CATV channei
A-8
2
13
A
B
C
D
E
19 20
21 22
23
24
25
26
27
28
29
30
31
32
F G
H 1
J
K
L
M
N
O
P
Q
R
S
33 34
35 36
37
• ••
94
95
96
97
98
99
T U
V W
W+1
W+68A-5
A-4 A-3 A
t
2 A-1
too
125
W-fS9
W484
Preparation
21
3
M
s
(D
<e
n
u
3
3
<D
«I
This VCR is designed to correspond to the standard cable
system. However, the cable TV services may vary from area
to area. Your local cable TV company may adopt either the
HRC’* or IRC** cable system. This VCR is capable of
receiving either of these cable systems in the best condition.
1) HRC (Harmonic Related Carriers)
All channels except for 5 and 6 are 1250 kHz lower than
the standard cable system. Channels 5 and 6 are 750
kHz higher than the standard cable system.
2) IRC (Incremental Related Carriers)
All channels except for 5 and 6 are the same as the
standard cable system. Channels 5 and 6 are 2000 kHz
higher than the standard cable system.
FINE TUNING indicator for receiving HRC or IRC cable
systems
Even when the signals are received in optimal condition, the
FINE TUNING indicator will not stay at the center position for
channels higher or lower that the standard cable system due
to the difference in the frequency.
NOTE:
Many cable TV systems use scrambled or encoded
signals for certain channels, usually premium or pay-per-
view channels.
A cable box is necessary to receive scrambled channels.
— . ------ . ----- •
__ ' ' '
t
----