Sony SLV-750HF - Manual (Page 36)

Timer Recording
4 Press ►.
Make sure that today's date is
flashing. If it isn't, reset the
clock to the correct time. See
“Setting the Time and Date"
(page 17).
TIMER SET/CHCCK 7/ 4$UN
START STOP CH
•J! 4SifR
S9
10 Press > to flash the
recording speed position,
then * or» or TAPE
SPEED until “EP” appears.
To change or correct a
setting before entering it.
press 4 to return to the item
you wish to change.
OOPH 10:SSPM
TIMER SET/CHECR 7/ 4SUN
DATE START STOP CH
7/lOSAi 9
Press A to set the month and
date to “7/10 SAT.”
The day of the week is
automatically set.
TIMER $ET/CHECK 7/ 4$UN 11 Press > to store the TIMER SET/CHECK 7/ ASOM
START STOP CH
setting.
DATE START STOR CM
► ^aOSAT 9:00PM lOtSSPM « CP
When all of the settings stop
•/*• •: ...........................
♦/•♦ ♦: ...........................
-/•• .................................. flashing and display a “ ►" in •/•♦ •: ............................
• / . . . . . .
..............
................................
the leftmost column, you've
............. completed the setting. • /.. •!...............
—— ----- lill----- 1:--------- To preset another program.
move the cursor to the next line and repeat steps 4 to 11.
6 Press ^ to flash the hours
position under “START,”
then A or» until “9:~ PM”
appears.
TIMER SET/CHECK 7/ 4SUN
DATE i^TART, STOP CH
• - SP
12 Press EXECUTE.
The message “Please push TIMER REC to set timer"
appears on the TV screen.
7 Preset to flash the minutes
position under “START,”
then »or »until ”00”
appears.
TIMER SET/CHECK 7/ 4SUN
DATE
START STOP CH
7/lOSAT 9A«>M -- SP
13 Press TIMER REC (ON/OFF)-
The VCR enters the timer recording standby mode and
the TIMER REC (recording) indicator lights up.
When using a cable box, make sure to leave it on.
To stop timer recording:
To stop timer recording while a program is being
recorded, press TIMER REC (ON/OFF).
8 Preset.
The cuisor blinks in the time
field under “STOP." Set the
time to finish recording,
referring to steps 6 and 7.
TIMER SET/CHECK 7/ 4SUN
DATE START STCy CH
7/lOSAT 9:00PM 10^^ -• SP
- --
9 Press >■ to flash the “CH”
field, then press » or » until
“26” appears.
Only the channels set in the
VCR will appear. You can
also use the CHANNEL +/- or
channel number buttons.
When using a cable box. the
cable box channels
appear under the CH section.
TIMER SET/CHECK 7/ 4SUM
DATE START STOP CH
7/lO$AT OPM 10 SPH.J(^SP
•
. .. .
NOTES:
• To change or correct the setting before completing it,
press < to return to the item you wish to change.
• To record video sources from LINE IN 1 or 2 jacks,
press INPUT SELECT in step 4 to 11 to move the
screen cursor to LINE 1 or 2 in the “CH" position. This
cursor returns to channel number on the third press.
• When CABLE BOX CONTROL is set to “ON." timer
recording cannot be done through LINE IN.
• If you don't proceed for more than one minute, the
VCR automatically exits from the TIMER SET/CHECK
menu.
36 Basic Operations