Sony SLV-750HF - Manual (Page 34)

Recording TV Programs
Recording with the TV Off
Turn off the power of the TV or color monitor.
There will be no interference with the recording.
When using a cable box, make sure to leave the power for it
set to on.
Watching One TV Program While Recording
Another
1 Press TV/VTR so that the VTR indicator light goes off.
2 Select the channel you want to watch on the TV.
Recording Multi-Channel TV Sound (MTS)
To record a stereo broadcast:
When a stereo broadcast program is received, the STEREO
indicator lights up. The stereo program is automatically
recorded in stereo. If a stereo program’s reception is poor,
set AUTO STEREO to “OFP in the SET UP MENU. (See
page 26.) The sound is heard in monaural but the noise is
reduced.
To record SAP (Second Audio Program) broadcast:
Normally, set NORMAL AUDIO to “MAIN” in the SET UP
MENU. The main sound is recorded on the normal track.
To record the SAP sound on the normal audio track, set
NORMAL AUDIO to “SAP” in the SET UP MENU.
To monitor the SAP sound during recording, press AUDIO
MONITOR to light the SAP indicator in the display window.
VTR Indicator Picture on the TV Screen
Lights up Channel selected by the VCR or the
playback picture of the VCR
No indication Channel selected by the TV
SET UP MENU
AUTO ANT SEI •OH OFF
►AUTO STEREO ON •OFF
OIMMCR eoN OFF
AUDIO MIX ON •OFF
normal AU0t0#MAtN SAP
SET UP MENU
AUTO ANT SEL •ON OFF
AUTO STEREO • ON OFF
DIMMER • ON OFF
AUDIO MIX ON • OFF
► normal audio MAIN • SAP
NOTES:
• When not recording an SAP broadcast, select “MAIN.” If you select “SAP,” no sound is recorded on the normal audio track.
• When the TV is connected only to the VHF/UHF OUT on the VCR, you cannot hear the program in stereo.
• In order to hear stereo playback, it is necessary to connect the L/R audio out connections of the VCR to a stereo monitor
TV, or stereo audio system.
34 I
Basic Operations