HP 2566C User Manual
Page 30
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Lift the ribbon spool from the retainer cups (Figure 3-11, A). Install
on the upper ribbon drive hubs by sliding toward the left (Figure
3-11, B).
5. Install upper ribbon spool.
6. Close the printer.
Raise the upper ribbon access cover up into the closed position and
close the printer’s top cover (Figure 3-12).
PREPARING THE PRINTER FOR OPERATION 3-9
Advertising
This manual is related to the following products: