1 or, Adjusting top of form – HP 2566C User Manual
Page 51
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Adjusting Top of
Form
The Top of Form (TOF) position is an arbitrary indicator of the first
line of print. Once the Top of Form is set, any succeeding
(
form
feed
)
advances paper one page length until the same position on the next page
is reached. This enables you to move swiftly to the first print line on the
succeeding page.
Adjust Top of Form using the keys on the Operator Control Panel.
Noie -.1 In order to set Top of Form, the swing-gate must be open and latched at
^ the top. The number 10 will flash in the display window indicating that
the swing-gate is open; however, disregard this message for now.
1. Adjust the paper.
Use the
fuNE
feed
1 or
[
fine
adj
.1
keys to adjust the paper so the
paper perforation is directly over the metal platen strip (Figure 3-26).
Pialen Metal-
Strip
Figure 3-26. Adjusting Paper Over the Platen
3-30 PREPARING THE PRINTER FOR OPERATION