KEYENCE IG Series - Manual (Page 141)

6-4 Configuration Tab
6-19 IG-E
6
IG Config
u
ra
tion Softw
a
re (
IG-
H1)
Transfer the configuration data to the IG Series after all settings are complete.
Before transfer, check that the PC (IG Configurator)and the IG Series are properly
connected.
Procedure for the transfer of configurations
1
Click the [Transfer] button on the tool bar.
2
Click the [Yes] button on the confirmation dialog box for the transfer of
configurations.
3
After the transfer of configurations is complete, the confirmation dialog
box appears. Then, if you start monitoring, click [YES] button. If you go
back to the configuration, click [No] button.
When the confirmation dialog box is displayed, the transfer of configuration data is
complete. The IG Series starts to operate according to the configuration data
transferred.
Transfer of Configuration data
Tool bar
Note Be careful not to disconnect the IG Series and PC during
transmission.