9 key lock function, Starting the key lock, Canceling the key lock (unlock) – KEYENCE IG Series User Manual
Page 57: Key lock function -21, Key lock function, Reference, Bas ic oper a tion s ig-e, Lock canceled, Lock set
3-21
3
B
as
ic Oper
a
tion
s
IG-E
3-9
Key Lock Function
The key lock function prevents unwanted button operations during measurement.
When the key lock function is active, operations other than switching the main screen and
canceling the key lock function are disabled.
While pressing the [MODE] button on the main screen, press
S or T button for 2 seconds
or more.
After [
NQE] blinks on the main display (upper level) for several seconds, the main screen is
restored.
If buttons other than display switching button on the sub display (lower level) are operated
in the key-locked state, [
NQE] is displayed on the main display (upper level) and setting
change operation is ignored.
While pressing the [MODE] button, press
S or T button for 2 seconds or more.
After [
WPN] blinks on the sub display (lower level) for several seconds, the main screen is
restored.
Reference
If you switch the bank by the external input, the key lock function must be set.
"3-8 Bank Function (Registering Multiple Tolerance Setting Values)" (page 3-18)
Starting the Key Lock
LASER
BANK
0
1
2
3
HI
LO
R.V.
ANALOG
HI
SHIFT
ZERO SHIFT
TIMING
LO
ALIGNMENT
.QE
GO
HOLD
CALC
CHECK
Lock set
Canceling the Key Lock (Unlock)
WP.
LASER
BANK
0
1
2
3
HI
GO
LO
R.V.
ANALOG
HI
SHIFT
ZERO SHIFT
TIMING
LO
ALIGNMENT
HOLD
CALC
CHECK
Lock canceled