Registering devices by network registration, Registering devices by network registration -6 – KEYENCE AutoID User Manual
Page 38
3-6
MANAGING PROJECTS
3
3-3
Registering Devices and Saving Projects
Registering Devices by Network Registration
When registering devices by network registration, follow the procedure below to register devices
to the project.
1
Select the master unit, and click the "Regist" button.
This registers the master unit.
• Parameters cannot be set to master units to be used on CC-Link or DeviceNet
from AutoID Navigator. Set parameters referring to the manual for the master
unit to be used.
• When building an RS-485 network system, select N-410 as the master unit.
2
Click the registered master unit, select the controllers to be added to the project as slaves,
and click the "Regist" button.
Select the type of controller to match the network you are building. Select an NX-
50CL or NX-50DN as the controller
if the master unit is registered.
Note
Note