Pilz PSSu K F FCU - Manual (Page 38)

Technical details
Operating Manual PSSu K F FCU
1002391-EN-04
38
Semiconductor outputs, 2-pole 312435
Terminal voltage when switching off inductive loads -185 V
Typ. output current at "1" signal and rated voltage of
semiconductor output 3,0 A
Residual current at "0" signal 0,02 A
Max. pulsed current for t < 100 ms 12 A
Open circuit detection off 0,17 kOhm
Potential isolation Yes
Short circuit-proof Yes
Permitted loads Inductive, capacitive, resistive
Monitoring threshold of semiconductor output 9 V
Max. duration of on time during self test 4 ms
Max. duration of off time during self test 200 µs
Max. processing time of semiconductor output when
signal changes from "0" to "1" 9,3 ms
Max. processing time of semiconductor output when
signal changes from "1" to "0" 0,250 ms
Times 312435
Max. reaction time of fast shutdown when signal
changes from "1" to "0" (depending on the configured
input filter time) 0,450 - 3,550 ms
Max. reaction time of fast shutdown when signal
changes from "0" to "1" (depending on the configured
input filter time) 0,650 - 3,750 ms
Environmental data 312435
Climatic suitability EN 60068-2-1, EN 60068-2-14, EN 60068-2-2, EN
60068-2-30, EN 60068-2-78
Ambient temperature
In accordance with the standard EN 60068-2-14
Temperature range 0 - 60 °C
Storage temperature
In accordance with the standard EN 60068-2-1/-2
Temperature range -25 - 70 °C
Climatic suitability
In accordance with the standard EN 60068-2-30, EN 60068-2-78
Humidity 93 % r. h. at 40 °C
Condensation during operation Not permitted
EMC EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN
61000-4-5, EN 61000-4-6, EN 61000-6-2, EN 61000-
6-4
Vibration
In accordance with the standard EN 60068-2-6
Frequency 10,0 - 150,0 Hz
Amplitude 0,35 mm
Acceleration 1g
Shock stress
In accordance with the standard EN 60068-2-27
Acceleration 15g
Duration 11 ms