Drylam Fujipla PLS3311 - Manual (Page 19)

AL-MEISTER PLS3311 INSTRUCTION MANUAL <Rev.3>
Information about the installed film appears for 5 seconds.
“WARM UP” display appears. POWER lamp lights. NOTE ・These displays will only appear when
the PLUSTER FILM is correctly set.
4．OPERATION
4-2. SETTING PAPER
1 Turn the feeder guard to outer side. NOTE ・Lower the feeder tray by using Feeder
Elevation Switch.
2 Widen the paper guide at both sides by loosening the knob. Hold both ends (marked with a
circle) and move the paper guides.