Drylam Fujipla PLS3311 - Manual (Page 40)

AL-MEISTER PLS3311 INSTRUCTION MANUAL <Rev.3>
5
The display returns to the initial display or the warm-up display when [MODE] is pressed or no
keys are pressed for 5 sec.
5-10. ADJUST BLADE READY POSITION
Adjust the starting point of the blade according to the width of PLUSTER FILM. The Blade Test will not
operate with any of the top covers open. Adjustments to the Feeder Tray and Decurling Bar should be
made first before cutter blade adjustments are made. The position of the paper should be finalized
before any detailed adjustment of the cutter blade is attempted.
1
Press [MODE] key.
2
Select BLADE TEST by pressing [UP] or [DOWN] scroll key.
3 Press [MODE] key.
This display appears.
4