Drylam Fujipla PLS3311 - Manual (Page 58)

AL-MEISTER PLS3311 INSTRUCTION MANUAL <Rev.3>
8．SPECIFICATIONS
Model PLS3311
Processing Speed 40~120” /min (360 sheets/hour based on 12.59” x 17.71” size)
Warm-Up Time 10 min.
Temperature Setting 140~270°F at room temperature*
Laminating Film Exclusive PLUSTER FILM, available in several formulations and widths
Feeder Max. Load 1.6” (Equivalent to 300 sheets of 0.032lbs/ft2 [157g/m2] paper)
Rear Stacker Max.
Load
2.4” (approx. 450 sheets)
Paper Thickness 0.021~0.064lbs/ft2 [104.7 ~ 314.0g/m2] 38-116 lb. cover (104.7-314.0 gsm)
Max. Paper Size
Stock: 14” (W) × 19-5/8” (L)
(4/18/11- Current software will process 25” maximum paper
length, however, feed and exit trays will require modification for that length. Feed table will accept 20.5”
maximum- bj)
Min. Paper Size 10-23/32” (W) × 11-7/8” (L)
Max. Laminating
Thickness
0.02” (Incl. film thickness)
Power Supply AC120V (60Hz)
Power Consumption 1,000W
Dimensions 65.12” (W) x 24.21” (D) x 44.29” (H) (with Feeder Tray and Rear Stacker)
Weight 204.1lbs (Laminator 189.6lbs, Feeder Tray 7.9lbs, Rear Stacker 6.6lbs)
Condition of use 32~105°F (better at 68±40°F) / not above an altitude of 6560’