Drylam Fujipla PLS3311 - Manual (Page 28)

AL-MEISTER PLS3311 INSTRUCTION MANUAL <Rev.3>
NOTE
ECO MODE
• The machine enters ECO MODE when the machine is idle of the
operation panel has not been operated for more than 30 minutes.
1) Shows the current temperature.
2) Shows the ECO MODE (target) temperature that is to be maintained
in ECO MODE.
• Buzzer will beep one minute before entering ECO MODE.
• Press any key to override the upcoming ECO MODE and return to normal
operation mode.
• The heater will turn off when the machine is idle for one hour.
4-7. FINISH LAMINATION
1
When you finish the operation turn the heating roller lever to the UP
position to release pressure on the rollers.
2
Turn the switch off and unplug.