Avery Dennison Monarch 9864 Error Messages - Manual (Page 16)

05/08 Rev. AB USER MANUAL Error Messages
9844 – 9854 – 9864
16
1125 Delete error
Status General software error
Action Turn off the printer, wait 30 seconds, then turn it back on.
See notes in “General software errors” section.
1126 File creation
Status A file could not be created. The error may be caused by an invalid file name
or insufficient printer memory.
Action Check all used file names for length, applied characters, etc. Change the
file name.
Check the printer's memory usage.
1127 File format
Status A file name does not match the (DOS-) filename convention.
Action Check all used file names for length, applied characters, etc. Change the
name.
1128 File exists
Status A file should be loaded into the printer memory via #DF command. The
command was used without adding the parameter "O" for "Overwrite", but a
file already exists under the given name.
Action Rename one of both files or set the parameter to "O".
1130 Float overflow
Status Value is too high for a floating comma variable.
Action Turn off the printer, wait 30 seconds, then turn it back on.
Reduce the value.
1131 Combi overflow
Status Valid is too high for a combi variable.
Action Turn off the printer, wait 30 seconds, then turn it back on.
Reduce the value.
1140 Line too long
Status Error during conversion from EPT into BIN: valid line length exceeded.
Action Reduce line length.
1141 Para. incorr. Bl
Status Error during processing of a Bit Image parameter.
Action Press Online to acknowledge.