Gasboy CFN III Config Mnl V3.4 - Manual (Page 105)

MDE-4316C CFN Series CFN III Configuration Manual for Windows NT® · April 2007 Page 99
Key Option Configuration
Figure 15-1: Example of Island Card Reader Display
# Ty S/D DISPLAY WHILE ENTERING OPTIONS
1 1 ! INSERT CARD ! !
2 3 6 ! ENTER YOUR PIN !YOUR PIN ! Optional
3 7 7 ! ENTER ODOMETER !ODOMETER ! Optional
4 11 2 ! REMOVE CARD/KEY ! !
5 8 ! PLEASE WAIT ! !
6 2 2 ! SELECT PUMP NUMBER !PUMP !
7 9 ! ! !
8 12 2 ! BEGIN FUELING ! !
9 !--------END---------! !
PIN Key
The Key Option requires a 4 digit PIN key to be loaded at the Site Controller. Use the
command LOad KEY to enter this PIN. The LOad KEY command requires 18 digits to be
entered at the prompt. The Key Option will use only the last 4 digits. Place 0s (zeros) in the
first 14 digits with the final 4 digits the required PIN key. Use
Figure 15-2 as a guide.
Figure 15-2: Example of LOad Key Display
A* LOad KEY ¿
Key? 00000000000000XXXX ¿
(substitute your PIN key for the Xs)
A*
Note: Key/Card cannot be used if accepting debit cards that require DES.