Gasboy CFN III Config Mnl V3.4 - Manual (Page 65)

MDE-4316C CFN Series CFN III Configuration Manual for Windows NT® · April 2007 Page 59
Island Card Reader Configuration
10 Activate pump: This step activates the selected pump to start pumping fuel. This step must be
included, and it must be placed after Select Pump and Verify Card steps.
11 Print receipt: This step instructs the receipt printer to print a receipt of the just- completed
transaction. This step is used in the receipt printer program, which is discussed next in this
chapter.
12 Remove card: The remove card step should be used with systems that have insert optical
ICRs.
The default message is REMOVE CARD.
13 Display text: Use a display text step to display a message that doesn't go with any other type
of step.
The default message is a blank display. The default display time is 2 seconds.
14 Display pump selected: The pump selected message inserts the number of the pump that's
been selected into user defined or default text.
The default message is PUMP #XX SELECTED. In a custom message the pump number will
be at the end or where you put an @ in the message. The default display time is 2 seconds.
15 Display amount authorized: The amount authorized message inserts the dollar amount that's
been authorized, or FILL if a fill has been authorized, into user defined or default text. A fill
can be authorized if the customer selected fill during the enter dollar amount step or if the
enter dollar amount step was not included in the program.
The default message is OK FOR $XXXX.XX or OK FOR FILL. In a custom message the
amount will be at the end of the message or where you put an @ in the message. The default
display time is 2 seconds.
16 Display product name: The product name message inserts, into user defined or default text,
the name of the product assigned to the pump that was selected.
The default message is the name of the product selected. In a custom message the name will be
at the end of the message or where you put an @ in the message. The default display time is 2
seconds.
17 Display product price: The product price message inserts, into user defined or default text,
the price per gallon (or liter) of the product selected, according to the appropriate price level. It
is usually appended to the product name message.
The default message is the price of the selected product. In a custom message the price will be
at the end of the message or where you put an @ in the message. The default display time is 2
seconds.