Welltech Dialogic SS7 Protocols ISUP - Manual (Page 122)

Section 8 Non-Primitive Interface
122
Parameter Area
offset 0, size 2 options Run time options
offset 2, size : module_id Used for partner module_id
offset 3, size 1 mngt_id Management module id.
offset 4, size 1 user_id User's module id.
offset 5, size 1 mtp_id MTP module id
offset 6, size 1 sccp_id SCCP module id (not currently used)
offset 7, size 1 maint_id Maintenance module id.
offset 8, size 2 timer_res Timer resolution.
offset 10, size 2 num_tscan Number of ticks per second.
offset 12, size 2 num_grps Max number of circuit groups in use.
offset 14, size 2 num_ccts Max number of circuits in use.
offset 16, size 2 max_sif Max length of SIF supported by MTP.
offset 18, size 1 sio Service Information Octet.
offset 19, size 1 trace_id Trace module id. .
offset 20, size 2 gap_msgs Number of messages sent every
gap_tim ticks.
offset 22, size 2 gap_tim Number of ticks between gap_msgs
messages.
parameters
offset 24, size 16 reserved Reserved for future use – set to zero.
ISUP Response
method By returning the message to the sender
type 0x3700
SUCCESS status
ISPE_BAD_PARAM