H3C Technologies H3C S3100 Series Switches - Manual (Page 650)

2-15
Operation Command Description
Enter Ethernet port view
interface interface-type
interface-number
—
Enable NTDP on the port ntdp enable Required
Enabling the cluster function
Follow these steps to enable the cluster function:
Operation Command Description
Enter system view system-view —
Enable the cluster function
globally
cluster enable
Optional
By default, the cluster function
is enabled.
Accessing the shared FTP/TFTP server from a member device
Follow these steps to access the shared FTP/TFTP server from a member device:
Operation Command Description
Access the shared FTP server of the
cluster
ftp cluster Optional
Download a file from the shared TFTP
server of the cluster tftp cluster get source-file
[ destination-file ]
Optional
Upload a file to the shared TFTP server
of the cluster tftp cluster put source-file
[ destination-file ]
Optional
Managing a Cluster through the Management Device
You can manage the member devices through the management device, for example, adding/removing
a cluster member, rebooting a member device, logging into a member device, and so on.
Follow these steps to manage a cluster through management device: