Configuring the ssh management functions – H3C Technologies H3C S3100 Series Switches User Manual

Page 719

Advertising
background image

1-6

Table 1-3 Follow these steps to configure the user interface for SSH clients:

To do...

Use the command...

Remarks

Enter system view

system-view

Enter user interface view of
one or more user interfaces

user-interface vty first-number
[ last-number ]

Configure the
authentication mode as
scheme

authentication-mode scheme
[ command-authorization ]

Required

By default, the user interface
authentication mode is
password.

Specify the supported
protocol(s)

protocol inbound { all |ssh |
telnet
}

Optional

By default, both Telnet and
SSH are supported.

z

If you have configured a user interface to support SSH protocol, you must configure AAA

authentication for the user interface by using the authentication-mode scheme command to

ensure successful login.

z

On a user interface, if the authentication-mode password or authentication-mode none

command has been executed, the protocol inbound ssh command is not available. Similarly, if

the protocol inbound ssh command has been executed, the authentication-mode password

and authentication-mode none commands are not available.

Configuring the SSH Management Functions

The SSH server provides a number of management functions. Some functions can prevent illegal

operations such as malicious password guess, further guaranteeing the security of SSH connections.

Table 1-4 Follow these steps to configure SSH management functions:

To do...

Use the command...

Remarks

Enter system view

system-view

Set the SSH authentication
timeout time

ssh server timeout
seconds

Optional

By default, the SSH authentication
timeout time is 60 seconds.

Set the number of SSH
authentication retry attempts

ssh server
authentication-retries

times

Optional

By default, the number of SSH
authentication retry attempts is 3.

Set the RSA server key
update interval

ssh server rekey-interval
hours

Optional

By default, the system does not update
the RSA server keys.

Configure a login header

header shell text

Optional

By default, no login header is
configured.

Advertising