H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 148)

135
Item Description
Configure
IPv6 Link
Local
Address
Auto Configure the way in which the VLAN interface obtains an IPv6
link-local address.
Select the Auto or Manual option:
• Auto: The device automatically assigns a link-local address for the
VLAN interface based on the link-local address prefix (FE80::/64)
and the link-layer address of the VLAN interface.
• Manual: Requires manual assignment.
These items
are available
after you
select the
Configure
IPv6 Link
Local
Address
option.
Manual
IPv6
Address
Configure an IPv6 link-local address for the VLAN interface.
This option is available after you select the Manual option. The prefix
of the IPv6 link-local address you entered must be FE80::/64.
Modifying a VLAN interface
By modifying a VLAN interface, you can assign an IPv4 address, an IPv6 link-local address, and an IPv6
site-local address, or global unicast address to the VLAN interface, or shut down or bring up the VLAN
interface.
NOTE:
•
After you modify the IPv4 address and status or the IPv6 address and status, or add an IPv6 unicast
address for a selected VLAN interface on the page for modifying VLAN interfaces, you need to click the
correct Apply button to submit the modification.
• After you change the IP address of the VLAN interface you are using to log in to the device, you will be
disconnected from the device. You can use the changed IP address to re-log in.
1. Select Network > VLAN Interface from the navigation tree.
2. Click the Modify tab to enter the page for modifying a VLAN interface, as shown in Figure 123 .