H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 82)

69
Table 17 Configuration items
Item Description
Create/Remove
Set the operation type:
• Create: Configure or modify the super password.
• Remove: Remove the current super password.
Password Set the password for a user to switch to the management level.
Confirm Password
Input the same password again. Otherwise, the system prompts that the two passwords
input are not consistent when you apply the configuration.
Password Display
Mode
Set the password display mode.
• Simple: The password will be saved in the configuration file in plain text.
• Cipher: The password will be saved in the configuration file in cipher text.
The plaintext password is not safe, and you are recommended to use the ciphertext
password.
Switching to the management level
This function enables a user to switch to the management level. A user must provide the correct password
to switch to the management level.
The access level switchover of a user is valid for the current login only. The access level configured for the
user is not changed. When the user re-logs in to the Web interface, the access level of the user is still the
original level.
To switch to the management level:
1. Select Device > Users from the navigation tree.
2. Click the Switch To Management tab.
The page for switching the user access level appears.
Figure 54 Switch to the management level.
3. Enter the super password.
4. Click Login.