H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 316)

303
Figure 282 802.1X configuration page
3. Configure the 802.1X feature globally as described in Table 88 .
4. Click Apply.
Table 88 Configuration items
Item Description
Enable 802.1X Enable or disable 802.1X authentication globally.
Authentication Method
Specify the authentication method for 802.1X users.
Options include CHAP, PAP, and EAP.
Advan
ced
Quiet
Specify whether to enable the quiet timer.
After an 802.1X user fails to be authenticated, the device will keep quiet
for a period of time defined by Quiet Period. During the quiet period, the
device will not perform 802.1X authentication on the user.
Quiet Period Specify the value of the quiet timer.
Retry Times
Specify the maximum number of authentication request attempts.
The network access device retransmits an authentication request if it
receives no response to the request it has sent to the client within a period
of time (specified by using the TX Period option or the Supplicant Timeout
Time option). The network access device stops retransmitting the request,
if it has made the maximum number of request transmission attempts but
still received no response.
TX-Period Set the username request timeout timer.
Handshake Period Set the handshake timer.
Re-Authentication Period Set the periodic online user re-authentication timer.
Supplicant Timeout Time Set the client timeout timer.
Server Timeout Time Set the server timeout timer.