HEIDENHAIN TNC 335 Technical Manual - Manual (Page 355)

4/96
TNC 360 3 List of Machine Parameters 5-11
3.5 Spindle
Machine
parameter Function and input Reaction /
CN 123 Page
MP3010 Spindle-speed output, Spindle orientation
Input value: 0 to 8
0 = No spindle-speed output
1 = BCD-coded output of the spindle speed,
only if the spindle speed changes
2 = BCD-coded output of the spindle speed
at every TOOL CALL
3 = Analog output of the spindle speed, but gear-
change signal only if the gear range changes
4 = Analog output of the spindle speed and
gear-change signal at every TOOL CALL
5 = Analog output of the spindle speed and
no gear-change signal
6 = As for input value 3, but with controlled
spindle for orientation
7 = As for input value 4, but with controlled
spindle for orientation
8 = As for input value 5, but with controlled
spindle for orientation
RESET 4-79
MP3020 Definition of the spindle speed range
Input value: 0 to 99 999 4-91
MP3030 Axis-halt on TOOL CALL with only a spindle speed
output
Input value: 0 or 1
1 = No axis halt on TOOL CALL
0 = Axis halt on TOOL CALL
4-87
MP3120 Zero spindle speed permitted
Input value: 0 or 1
0 = 0 rpm permitted
1 = 0 rpm not permitted
4-82