4 downloading external data – HEIDENHAIN TNC 407 (243 020) Service Manual User Manual
Page 83
SERVICE MANUAL TNC
Issue:
01.09.1995
Page 70
15.4 Downloading External Data
Preparations:
Connect the external data medium (ME, FE or other peripheral unit) to the TNC.
Prepare the external data medium for data transfer:
press
q
and
the ME
press
at the FE
Select the operating mode, the Baud rate and the interface assignment (see 14.1 and 14.2)
at the TNC.
1 5 . 4 . 1
Downloading Files with the Extensions .H,
.D, .P,
otherwise
Switch TNC to operating mode EDITING
(key on VDU)
Activate data transfer menu
Go to the directory of the external data medium
Soft key
ALL< to display all file types
Use arrow key at the VDU to switch the soft-key
row to the file type display
Soft key
to select requested file
type
Use arrow key at the VDU to switch the soft-key
row back to the data transfer menu
Soft key
ALL< or
EXT
DIRECTORY< to display the directory of the ext.
data medium at the TNC
If necessary:
select file with arrow key
Soft key
.
for data transfer
Download further files, if required
Soft key
to end the data transfer menu
TNC is in the operating mode EDITING