Enterasys Networks 1G58x-09 - Manual (Page 333)

Spanning Tree Configuration Command Set
Reviewing and Setting Spanning Tree Port Parameters
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 6-47
Command Mode
Read-Write.
Example
This example shows how to set Fast Ethernet front panel port 11 as an edge port:
6.2.2.13 clear spantree adminedge
Use this command to reset the edge port status for one or more Spanning Tree ports to the default
value of false.
clear spantree adminedge [port-string]
Syntax Description
Command Defaults
If port-string is not specified, edge port status will be reset for all ports.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to reset Fast Ethernet front panel port 24 as a non-edge port:
6.2.2.14 show spantree spanguard
Use this command to display the status of the Spanning Tree span guard function.
show spantree spanguard
Matrix>set spantree adminedge fe.0.11 true
port-string (Optional) Resets edge port status for specific port(s). For a
detailed description of possible port-string values, refer to
Section 4.1.2 .
Matrix>clear spantree adminedge fe.0.24