Enterasys Networks 1G58x-09 - Manual (Page 339)

Spanning Tree Configuration Command Set
Reviewing and Setting Spanning Tree Port Parameters
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 6-53
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the state of the span guard trap function:
6.2.2.23 set spantree spanguardtrapenable
Use this command to enable or disable the sending of an SNMP trap message when span guard
detects that an unauthorized port has tried to join the Spanning Tree.
set spantree spanguardtrapenable {disable | enable}
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to enable the span guard trap function:
Matrix>show spantree spanguardtrapenable
spanguard traps are enabled
disable | enable Disables or enables the span guard trap function.
Matrix>set spantree spanguardtrapenable enable