6 configuring secure shell (ssh), Configuring secure shell (ssh) -78, Section 14.3.6 – Enterasys Networks 1G58x-09 User Manual
Page 760: 6 configuring secure shell (ssh) purpose, Commands
Security Configuration Command Set
Configuring Secure Shell (SSH)
14-78
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Example
This example shows how to set the PWA control mode to auto for all ports:
14.3.6 Configuring Secure Shell (SSH)
Purpose
To review, enable, disable, and configure the Secure Shell (SSH) protocol. SSH provides a secure,
remote connection to the device by permitting or denying access based on IP address, ciphers and
MAC algorithms.
Commands
The commands needed to review and configure SSH are listed below and described in the
associated section as shown:
•
show ssh (
•
ssh (server) (
•
set ssh (
)
•
)
•
clear ssh ciphers (
•
set ssh port (
•
set ssh mac (
•
clear ssh mac (
)
•
set ssh rekeyintervalseconds (
•
set ssh passwordguesses (
•
set ssh logingracetime (
•
clear ssh keys (
)
•
clear ssh config (
)
Matrix>set pwa portcontrol auto