Extron electronic 3000B - Manual (Page 83)

Exatron 3000B
www.exatron.com 5-4 Chapter 5 Diagnostics
[3] CHK LIGHT POLE; Optional Function. Only installed on 3000B at customer request.
This routine is used to check the functionality of the light pole for those systems
so equipped. The buttons act as toggle switches for the lights. As in the solenoid
check, the [0] key will turn all the lights off, and the [9] key will turn them all on.
DEFINITION OF LIGHT UNDER NORMAL OPERATION
[1] = Green light Handler running parts normally.
[2] = Amber light Handler is operating normally but requires operator intervention
to continue. For example, a new tray of parts needs to be loaded.
[3] = Red light Error in handler operation. Handler will pause and error
message will flash on the microterminal display. Needs
immediate operator intervention to resolve problem.
[9] = All lights on For diagnostic purposes only.
[0] = All off For diagnostic purposes only.
↵ ↵↵ ↵
to return to OUTPUT CHECK.
↵ ↵↵ ↵
To return to DIAGNOSTICS Menu.
[4] CPU PORT CHECK; N/A
↵ ↵↵ ↵
to return to OUTPUT CHECK.
↵ ↵↵ ↵
To return to DIAGNOSTICS Menu.
[3] key = INTERFACE CHECK, then:
[1] RS-232
[2] HANDLER OUT CHECK
[3] ISSUE NEW START
[4] SERVO RS-232 CHECK
↵ ↵↵ ↵
to return to INTERFACE CHECK.
↵ ↵↵ ↵
To return to DIAGNOSTICS Menu.
[4] key = ALL MOTOR CHECK, then:
[1] SORT MOTOR CHECK;
↵ ↵↵ ↵
to return to ALL MOTOR CHECK.
[1] 1 Step Left.
[2] N/A
[3] 1 Step Right.
[4] 2 Steps Left
[5] N/A
[6] 2 Steps Right.
[7]
Jog Left.
[8] N/A
[9] Jog Right.
[0] Motor Off.