Interphase Tech RAS Communications Controller 5536 - Manual (Page 134)

Verifying COM Ports
114 Interphase Corporation
N
OTE
HyperTerminal is a standard feature of Windows NT. If it is
not present in the Accessories menu, it can be installed.
To install HyperTerminal, open the Control Panel. Select
Add-Remove, and Windows NT Setup. Then select
HyperTerminal in the Communications dialog box.
2. Enter a name you want to use to save the file, and click
OK. (The name must contain at least one character.)
The Connect To dialog box appears:
Figure 7-2. Choosing the COM Port to Verify
If the list of COM ports is blank, the Serial driver is not
installed.
3. Choose the serial COM port to verify (COM i XX) and
click OK.
The Port Settings dialog box appears.