Interphase Tech RAS Communications Controller 5536 - Manual (Page 35)

2
5536 PRI RAS Communications Controller Users Guide 15
2 Installing the
Hardware
Overview
You can install the communications controller board in any
suitable PCI expansion slot. To install the board, follow these
basic steps:
1. Verify that the system meets minimum requirements.
2. Inspect the board.
3. Install the board in a host expansion slot.
4. Connect the board to an MVIP Bus, if required.
The tools required are a grounding strap and a #1 Phillips head
screwdriver. Both are included in the product packaging.
N
OTE
Refer to the users manual that came with your personal
computer for additional detailed installing instructions.
Verifying Minimum Requirements
Before installing this board, verify that your system meets the
minimum requirements described in
Minimum System
Requirements on page 12 .