Interphase Tech RAS Communications Controller 5536 - Manual (Page 79)

Chapter 4: Installing the Software
5536 PRI RAS Communications Controller Users Guide 59
– If you do not need to install another RAS support
driver, skip to Completing the Software Installation
on page 62 .
Installing the Remote Access Manager
Suite
The Acotec Virtual Motion Remote Access Manager Suite is
bundled with the 5536-DM RAS software. (For an overview of
the Remote Access Manager Suite, see
RAS Management Tool
on page 7 .)
The Remote Access Manager Suite Setup program starts
automatically after you install the first RAS support driver. (If
the suite is not installed with the first driver, the Setup program
also starts after you install the second RAS support driver.)
The Remote Access Manager Suite requires Windows NT 4.0
and the NT Service Pack 3 or higher. It includes client and
server components. Before installing the components, review
the Remote Access Manager PDF documentation on the 5536-
DM RAS installation CD for detailed recommendations.
N
OTES
The installation procedure may differ from the steps
described in this section, depending on the options you
select.
If you need to remove application components after
installation, use the Add/Remove Programs function in
the Windows NT Control Panel.