Interphase Tech RAS Communications Controller 5536 - Manual (Page 165)

Appendix B: Using the SynWatch Utility
5536 PRI RAS Communications Controller Users Guide 145
Stopping and Freezing the Display
To stop frame watching and discard all frame information for
a selected port or channel, left-click the checkbox beside the
watched port or channel.
To temporarily stop watch activity without discarding frame
information, freeze the display. Freezing the display allows
you to read information more easily in the monitor panel.
To freeze the display, from the Watch menu, select Freeze. To
resume display at the point where it stopped, from the Watch
menu, deselect Freeze.
Changing Display Settings
The SynWatch window displays information about each
exchanged frame in text lines in the monitor panel. You can
change a channel’s watch parameters, such as the size of a
watched frame and the character set used to display raw data.
You can also change the appearance of the text that describes
the monitored events on each ISDN channel.
Changing Watch Parameters
To change parameters for a port or channel, do the following:
1. In the configuration panel, right-click the port or
channel, and select Settings from the pop-up menu. (Or
left click the port or channel, and select Settings from
the Watch menu.)