7 - installing satellites using the mcu, Procedure detailed in, Section 2.7 – Lennox Hearth G8 User Manual

Page 45: 7 installing satellites using the mcu

Advertising
background image

54-0198

42

TracVision G8 Owner’s Manual - Guide to Technical Information

2.7

Installing Satellites Using
the MCU

The TracVision G8 can track a variety of DVB-compatible and
DSS (DIRECTV) satellites. The system contains a preprogrammed
library of North American, European, and Latin American
satellites. It also has two open slots that you may use to program
two additional satellites of your choice. Table 2-5 lists the possible
satellite pairs in North America and Table 2-6 lists the satellites
that can be programmed in Europe (as long as the paired satellites
are within range of the TracVision antenna)
. Two of these satellites
may be selected to reside in the system’s active memory as
Satellites A and B. For Latin American systems, either Galaxy_8W
or Galaxy_8E can be selected, but not both.

Any two of the European satellites listed below can be paired together, as
long as the satellites are within range of the antenna:

Astra1

Sirius

Astra2N

Thor

Astra2S

Arabsat

Hispasat

Nilesat

HotbirdWB

Optus_B1

Hotbird

Optus_B3

The satellites listed in TracVision G8’s preprogrammed satellite
library will be sufficient for most users. However, if you wish to
install one or two satellites that are not in the library, skip to

“Programming User-defined Satellites” on page 45

. After configuring

these user-defined satellites, return to the satellite installation
process in

“Installing Your Selected Satellites” on page 43

.

Table 2-5

Available Satellite Pairs

– North America

(North American LNB Required)

DSS_101

DSS_119

Echo_61

Echo_110

Echo_119

Echo_148

Expressvu

ExpressTV

DSS_101

DSS_119

Echo_61

Echo_110

Echo_119

Echo_148

Expressvu

ExpressTV

Table 2-6

Available Satellites – Europe

(European LNB/Feed Tube

Assembly Required)

Advertising