Lennox Hearth G8 - Manual (Page 70)

Manually Controlling the Antenna
In certain circumstances, you may need to control the azimuth,
elevation, and tracking of the TracVision G8 antenna manually,
using the process shown in Figure 3-12. Use the + and - keys to
manually move the dish. Azimuth measurements are reported as
relative to the bearing of the vessel’s bow.
Using the MCU Interface
54-0198 69
Proceed to "Restarting the
Antenna"
Man control antenna?
Enter Next Return
AZ = XXX.X° EL = XX.X°
- Azimuth +
AZ = XXX.X° EL = XX.X°
- Elevation +
Make antenna track?
Yes No Cancel
YES tells the antenna to begin
actively tracking the set azimuth
and elevation. NO leaves the
antenna halted in its current
position.
Figure 3-12
Manual Antenna
Control Procedure
If the manual adjustment of the
antenna reached the maximum
rotation (720°), the antenna will
rotate 360° and return to the
Manual Control Antenna screens.
InstantOn Reboot
Please wait
If the system started up in Instant
On mode, the following message
may be displayed: