Lucent Technologies INTUITY Messaging Solutions Enhanced-List Application 585-310-575 - Manual (Page 22)

Installation
12 Issue 1 July 1997
3. Press (F3) .
The system stops the voice system and displays the a series of status
messages. When the voice system has stopped, the system displays the
message:
The Voice System has stopped.
Press Enter to Continue.
4. Press .
5. Press (F6) .
The system displays the System Control window.
6. Select
The system displays the Wait Time window (Figure 2-2).
7. Enter 0 (zero) to indicate you would like an immediate shutdown.
8. Press (F3) .
The system displays the following message:
Shutdown started.
When the system is completely shut down, the system displays the
message.
The system is down.
Press Ctrl-Alt-Del to reboot your computer.
9. Make sure that there is no diskette in the diskette drive.
10. Press .
The system performs a power-on self test (POST). The screen lists various
hardware components and the status of the tests performed on those
components.
When the reboot is complete, the system displays the following prompt:
Startup of the Voice System is complete.
Console Login:
SAVE
ENTER
CANCEL
>Shutdown System
SAVE
CONTROL ALT DEL