Lucent Technologies INTUITY Messaging Solutions Enhanced-List Application 585-310-575 - Manual (Page 40)

Administering AUDIX for ELA
30 Issue 1 July 1997
3. In the Trusted-Server Name: field , enter a name for the first ELA trusted
server. (See the Note below for tips on trusted server names.)
This name must be a unique 1- to 10-printable character entry.
Additionally, this name cannot start with a number and cannot contain any
embedded spaces, for example, denver 1 is not allowed, but denver_1 is
allowed. (Use the
li tr and li ma commands to view existing names and
ensure that you are not using a name that is already assigned.)
NOTE:
You must administer two ELA trusted servers. The installation
worksheets should have the ELA trusted server names. If not, we
recommend that you use names that are descriptive enough that you
can tell them apart, for example, enter the first ELA trusted server
name as ela_admin and, when you add the second ELA trusted
server, use ela_deliv.
4. Enter a 5- to 10-alphanumeric password that the trusted server must use
to log on to the AUDIX server. As you type, your keystrokes display, but
will appear as a series of asterisks (
*
) after you save.
5. Enter the TCP/IP address of this Lucent I NTUITY in the form w.x.y.z, where
each letter is a number, 0 to 255. (See page 3-23 for information how to
determine your system’s IP address.)
6. Enter Enhanced-List Application in the Service Name: field. Type
exactly as listed, including the hyphen and capitalization.
Every ELA server will have the same service name. (For example, if you
have two ELA servers, they will have separate trusted server names, but
the same service name.)
7. Enter n in the Cross-Domain Delivery? field.
8. For the administrative ELA trusted server (ela_admin), enter 0 in the
Minutes of Inactivity Before Alarm: field.
For the delivery ELA trusted server (ela_deliv), enter 255 in the Minutes
of Inactivity Before Alarm: field
9. Press (F3) to save the information in the system database.
The cursor returns to the command line, and the system displays the
message
Command Successfully Completed .
10. You must now add the delivery ELA server. Return to step 2, and repeat
this procedure, ensuring that you use a unique name for the delivery
trusted server, that is, do not use the name of the ELA trusted server you
just added.
ENTER