Side view, Carefully slide the cover off the system, Remove the 4 screws from the mounting bracket – LOREX Technology NETWORK READY H.264 HIGH PERFORMANCE DIGITAL VIDEO SURVEILLANCE RECORDER LH300 Series User Manual
Page 122: Remove the sata data and power connectors, Remove the hard drive from the mounting bracket, Edge mini dvr
Advertising
108
Appendix E: Replacing the Hard Drive
EDGE Mini DVR
Make sure that the system is OFF and the power cable has been disconnected before changing
the hard drive.
Removing the hard drive
To remove the hard drive:
1. Remove the screws on the side panels. Remove the single screw on the top and bottom panel
of the system.
2. Carefully slide the cover off the system.
3. Remove the four screws that secure the hard drive to the mounting bracket.
4. Remove the SATA data and power connectors.
5. Remove the hard drive from the mounting bracket.
Side view
Remove the 4 side panel screws
Remove the single screw on the top and bottom of the system
Bottom view
Top view
Remove the 4 screws from
the mounting bracket
Advertising