LOREX Technology NETWORK READY H.264 HIGH PERFORMANCE DIGITAL VIDEO SURVEILLANCE RECORDER LH300 Series - Manual (Page 31)

17
SETTING THE DATE AND TIME
It is highly recommended to immediately set the date and time when first setting up your system.
To set the date and time:
1. Click to open the Main Menu.
2. Click to open the Setup menu.
3. Click Date/Time Setup and configure the following options:
• Date Mode: Use the scroll wheel to select Y/M/D, D/M/Y, or M/Y/D.
• Date: Use the scroll wheel to manually enter the date.
• Time: Use the scroll wheel to manually enter the time.
4. Click Exit/Update. The new date and time are saved; the system returns to the Setup menu.
5. Right-click to exit until all menus are closed. The date and time will appear on the
bottom-left corner of the screen.
Figure 5.0 Clock menu