LOREX Technology NETWORK READY H.264 HIGH PERFORMANCE DIGITAL VIDEO SURVEILLANCE RECORDER LH300 Series - Manual (Page 41)

27
MANAGING PASSWORDS
Refer to the tables below for the user name (ID) and password required to log in to your system:
Using the Password Wheel
The system uses a graphical Password Wheel for inputting and changing user IDs and 4-digit,
numeric passwords.
To use the Password Wheel:
• Using the mouse, move the cursor and click from 0~9.
You cannot select the options to the left of the Password Wheel (user ID, password)—you can only
select the digits. If you make a mistake, simply right-click to exit and re-select the option to try
again.
Enabling and Disabling Passwords
By default, passwords are disabled when you first startup the system. With passwords enabled,
you need to enter your user ID and password whenever you access the system Main Menu, Event
List, or Playback mode.
To enable/disable passwords:
1. Click to open the Main Menu. If necessary, login to the system.
2. Click . The Setup menu opens.
3. Click Password Enable and scroll up/down to select O to enable passwords, or X to disable.
4. To exit, right-click until you return to the main screen.
LEVEL ID PASSWORD
USER 1 1111
ADMIN 2 2222
LEVEL ID PASSWORD
USER 2 2222
ADMIN 3 3333
LEVEL ID PASSWORD
GUEST 7 1111
USER 8 2222
ADMIN 9 3333
8 & 16 Channel
4/ 8/ 16 Channel
4 Channel
Local DVR Access Remote/LAN Viewing
Figure 8.0 Login with your user ID and password using the Password Wheel