Laser classification – Laser beta lasermike LS8000-3 User Manual

Page 10

Advertising
background image

LaserSpeed 8000-3 Instruction Handbook

Safety Information

Part No. 93463 / Drawing No. 0921-01561

Page 10 of 221

Revision A (Sep 2007)

Laser Classification

The Model LS8000-3 Non-contact Length and
Speed Gauge (Model LS8000-3) is classified as a
IIIb laser device. This category contains infrared and
visible laser devices with powers up to 500 mW.
The optical gauge in the system uses a 50 mW
solid-state laser device operating between 760 and
800 nm (near infrared region of the spectrum).

A class IIIb product must have the following safety
features:

A 5-second delay after power-up before laser radiation is emitted from

the gauge.

An indicator light to inform personnel near the gauge that laser

radiation is being emitted.

A mechanical device to physically block the laser beam from exiting the

gauge.

An interlock circuit to shut off the laser when the circuit is opened.

All hazards must be properly identified with warning labels.

These basic safety features are incorporated to promote safe operation of the
laser.

A class IIIb laser must also have a key switch to power the laser, ensuring that
only trained personnel can operate the instrument. Because the location of the
gauge can often make it difficult to access a key switch, the key switch needs
to be installed by the final user. It should be placed in a location that will be
readily accessible to the operators. For more information on installing the laser
key switch, see the

Installing the System

section.

The user of a laser device must comply with a different set of regulations.
Many countries and individual states have passed legislation regarding the use
of laser products.

VISIBLE AND INVISIBLE

LASER RADIATION

AVOID EXPOSURE TO BEAM
CLASS 3B LASER PRODUCT

Complies with EN60825-1:2001. Complies with 21 CFR 1040.10

and 1040.11 except for deviations pursuant to Laser Notice
No. 50, dated July 26, 2001.

PEAK POWER 50mW

WAVELENGTH 650-810 nm

WARNING - NO USER SERVICEABLE

PARTS. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

Advertising