Laser beta lasermike LS8000-3 - Manual (Page 122)

LaserSpeed 8000-3 Instruction Handbook
RS-232/RS-422 Communication
Part No. 93463 / Drawing No. 0921-01561 Page 122 of 221 Revision A (Sep 2007)
Baud Rate & Framing Settings
Setting Baud Rate Framing
1 230.4k 7n2
2 115.2k 7n2
3 57.6k 7n2
4 38.4k 7n2
5 19.2k 7n2
6 9600 7n2
7 4800 7n2
11 230.4k 8n1
12 115.2k 8n1
13 57.6k 8n1
14 38.4k 8n1
15 19.2k 8n1
16 9600 8n1
17 4800 8n1
RS-232 Maximum Cable Lengths
Beta LaserMike recommends the following cable lengths based on the chosen
RS232 baud rate. (These recommendations do not apply to RS-422, which is
designed for long distances communications.)
RS-232 Baud
Rate
Recommended Maximum
Cable Length
230400 10m
115200 10m
57600 20m
38400 50m
19200 100m
9600 200m
4800 200m
If you experience problems at high baud rates when using RS-232 over a long
cable, try decreasing the baud rate or switching to RS-422. The RS-422 port
is designed for long distances at high baud rates. Beta LaserMike