Laser beta lasermike LS8000-3 - Manual (Page 62)

LaserSpeed 8000-3 Instruction Handbook
Interfacing with the LS8000-3
Part No. 93463 / Drawing No. 0921-01561 Page 62 of 221 Revision A (Sep 2007)
Heavy Industrial Cables
LaserSpeed heavy industrial cables are designed for use in heavy industrial
environments where high temperatures and heavy coolant spray are
encountered. They have an extremely durable outer jacket, and are
impervious to industrial lubricants, coolants, and solvents.
Never pull the cable by the connector.
Always attach the pulling cable to
the cable itself. Pulling the cable by the connector may damage the connector
pins. The circular connector has a protective end cap that should be screwed
over the cable pins when pulling through conduit, or any time the cable is
disconnected from the LS8000.
The cable must be screwed onto the LS8000-3 connector until it fully seated—
the yellow stripe on the LS8000-3 connector is not visible when the cable is
fully tightened.