Parker Hannifin Dynaserv G2 - Manual (Page 173)

320 Pulse position command value
Unit: pulse
Displays the pulse position command value.
321 Pulse position current value
Unit: pulse
Displays the current pulse position value.
322 Pulse position deviation
Unit: pulse
Displays the pulse position deviation.
323 Command unit command value
Unit: Axis command unit
Displays the command unit command value.
324 Scaling data (command unit side)
Unit: Axis command unit
Displays the axis scaling data (command unit side) that is actually used.
325 Scaling data (pulse side)
Unit: pulse
Displays the axis scaling data (pulse side) that is actually used.
328 Position settling status
Unit: None
Indicates that the axis position deviation is within the specified range.
335 Interface ready
Unit: None
Indicates that the PLC interface is ready.
337 Overload status
Unit: None
Displays the overload status.