Polycom KIRK 14117800 - Manual (Page 115)

Configuring KIRK Wireless Server 600v3 115
KIRK Wireless Server 600v3 Installation and Configuration Guide
7.6.4.6 Configuring DECT System
(Secondary)
1
Under the Configuration menu, click DECT, and then click System.
Figure 56 Adm. Page: Configuration/DECT/System page
2 In the Name field, the name MUST ALWAYS be DECT.
If changing the name, the system cannot operate.
3 In the PWD (password) field, type the password, and then type it again in the field
below.
Note: If you have changed the password when configuring the Master (Primary)
KWS600v3, you must use this when configuring the alternative Master (Standby)
KWS600v3 and KWS600v3 secondaries.
4 Click OK.
5 Click Reset (under Administration menu) to save your configuration.