Polycom KIRK 14117800 - Manual (Page 189)

189
KIRK Wireless Server 600v3 Installation and Configuration Guide
Chapter 12 Configuration/General/Update
On this page the device can be configured to poll an update server (a normal web server).
A file pointed to by an URL is read from the update server and executed. This is an
efficient mechanism to keep a large number of devices up to date. See chapter 13
“Configuration of the Update Server” for a detailed description of the available
commands.
URL
An URL, for example http://192.168.0.1/update/script-ip800.txt, pointing to a file
whose commands are executed.
If the URL ends with a slash '/', for example http://192.168.0.1/update/, the device is
adding the file name update-ipxxx.htm automatically, deduced from the device short
name (for example update-ip800.htm). Furthermore some placeholders may be used in
the URL-String as described in the update servers scfg command description.
These placeholders may be used e.g. to address a device-specific directory (http://
192.168.1.2/update/#h/script.txt) or to generate HTTP-GET parameters (http://
192.168.0.1/update/script.php?mac=#m).
Some standard parameters are always appended to the query part of the URL:
Name Value Example
ver human readable version
information (as shown in the
Version' line of the general page
(display, for programmatic use
rather apply #F etc.)
6.00 dvl-sr1
IP6000[07-60600.03],
Bootcode[145], HW[104]
16384/131072
BOOT last serial for boot command 336
PROT last serial for prot command 07-6060003
CHECK last serial for check command 20070511-01
BMC last serial for bmc command
CFG last serial for cfg command
CFG-BACKUP-NUM last backup number for scfg
command
If access to the command file requires authentication it must be configured within the
HTTP-Client of the device.