Figure 1, Synchronization chain, Figure 2 – Polycom KIRK 14117800 User Manual
Page 34
34
Deploying KIRK Wireless Server 600v3
14117800, Ed.2.6
3.2.2.1 Synchronization Chain With One Sync Master (Primary Sync Ways)
Figure 1
Synchronization Chain
• The synchronization chain must always overlap with the KWS600v3 to sync
on.
• No. 100 is the Sync Master.
• Other radio units are connected to the Sync Master through the
synchronization chain.
• If one of the radio units in the synchronization chain is not working, then the
Figure 2
Synchronization Chain Layout without Alternative Sync Ways
• No. 100 is the Sync Master (can be numbered 1-255).
Note:
It is recommended to place the Sync Master in the middle of the building.
•
Green line
: Shows the primary sync ways.
•
Brown line
: Only handover overlap is needed.
Note:
It is recommended to make a site planner. Every KWS600v3 must be
numbered with Radio ID, Primary sync Radio ID, and Alternative sync Radio
ID.