Figure 31, Figure 32 – Polycom KIRK 14117800 User Manual
Page 95
Configuring KIRK Wireless Server 600v3 95
KIRK Wireless Server 600v3 Installation and Configuration Guide
7.6.1.4 Configuring Ethernet Link
(Primary)
1
Under the Configuration menu, click ETH0, and then click Link.
Figure 31
Adm. Page: Configuration/ETH0/Link page
2
From the Link list, select auto, and then click OK.
When selecting auto, the link speed will be determined by the network switch.
3
Click Reset (under Administration menu) to save your configuration.
7.6.1.5 Setting LDAP Mode
(Primary/LDAP Server)
For the Master (Primary) KWS600v3 to act as an LDAP Server for all the KWS600v3
secondaries, you need to set the LDAP (Lightweight Directory Access Protocol) mode.
Note:
It is recommended that the Primary KWS600v3 acts as an LDAP Server in small to
medium-sized installations.
1
Under the Configuration menu, click LDAP, and then click Server.
Figure 32
Adm. Page: Configuration/LDAP/Server page
2
In the User fields, type the user names.